Cisco ASR 9000 Serie Configuration Manuals Download Page 76

Page: 76 / 378

DETAILED STEPS

Purpose

Command or Action

(Optional) Displays the name and value of EEM environment
variables.

show event manager environment

[

all

environment-name

]

Step 1

Example:

RP/0/RSP0/CPU0:router# show event manager
environment all

•

The

all

keyword displays all the EEM environment

variables.

•

The

environment-name

argument displays information about

the specified environment variable.

configure

Step 2

Resets environment variables to new values.

event manager environment var-name

[

var-value

]

Step 3

Example:

RP/0/RSP0/CPU0:router(config)# event manager

•

The

var-name

argument is the name assigned to the EEM

environment configuration variable.

•

The

var-value

argument is the series of characters, including

embedded spaces, to be placed in the environment variable

var-name

environment _cron_entry 0-59/2 0-23/1 * * 0-7

•

By convention, the names of all environment variables
defined by Cisco begin with an underscore character to set
them apart; for example, _show_cmd.

•

Spaces may be used in the

var-value

argument. The

command interprets everything after the

var-name

argument

to the end of the line to be part of the

var-value

argument.

—

Repeat

Step 3, on page 60

to configure all the

environment variables required by the policy to be
registered in

Step 5, on page 60

Step 4

Registers the EEM policy to be run when the specified event
defined within the policy occurs.

event manager policy policy-name username
username

[

persist-time

[

seconds

infinite

] |

type

[

system

user

]]

Step 5

•

Use the

system

keyword to register a system policy defined

by Cisco.

Example:

RP/0/RSP0/CPU0:router(config)# event manager

•

Use the

user

keyword to register a user-defined system

policy.

policy tm_cli_cmd.tcl username user_a type

system

•

Use the

persist-time

keyword to specify the length of time

the username authentication is valid.

In this example, the sample EEM policy named tm_cli_cmd.tcl is
registered as a system policy.

commit

Step 6

Cisco ASR 9000 Series Aggregation Services Router System Monitoring Configuration Guide, Release 4.2.x

Configuring and Managing Embedded Event Manager Policies

How to Write Embedded Event Manager Policies Using Tcl

Summary of Contents for ASR 9000 Serie



























































































































































































































































































































































































Search results

Summary of Contents for ASR 9000 Serie

Reviews:

Brands by name

Popular brands

Cisco ASR 9000 Serie, Configuration Manuals

Search results

Summary of Contents for ASR 9000 Serie

Reviews:

Brands by name

Popular brands