Cisco ASR 9000 Serie Configuration Manuals Download Page 41

Page: 41 / 378

Purpose

Command or Action

(Optional) Displays logging events beginning with the last event in the
logging events buffer.

show logging events buffer last event-count

Example:

RP/0/RSP0/CPU0:router# show logging
events buffer last 20

Step 2

•

For the

event-count

argument, enter the number of events to be

displayed.

•

In this example, the last 20 events in the logging events buffer are
displayed.

(Optional) Displays the first and last events in the logging events buffer.

show logging events buffer first event-count
last event-count

Step 3

•

For the

event-count

argument, enter the number of events to be

displayed.

Example:

RP/0/RSP0/CPU0:router# show logging
events buffer first 20 last 20

•

In this example, both the first 20 and last 20 events in the logging
events buffer are displayed.

Displaying Alarms by Location

This task explains how to display alarms by location.

The commands can be entered in any order.

Note

SUMMARY STEPS

show logging events buffer location node-id

show logging events buffer location node-id event-hi-limit event-id event-lo-limit event-id

DETAILED STEPS

Purpose

Command or Action

(Optional) Isolates the occurrence of the range of event IDs to
a particular node.

show logging events buffer location node-id

Example:

RP/0/RSP0/CPU0:router# show logging events
buffer 0/2/CPU0

Step 1

•

The location of the node is specified in the format

rack/slot/module

Cisco ASR 9000 Series Aggregation Services Router System Monitoring Configuration Guide, Release 4.2.x

Implementing and Monitoring Alarms and Alarm Log Correlation

Displaying Alarms by Location

Summary of Contents for ASR 9000 Serie



























































































































































































































































































































































































Search results

Summary of Contents for ASR 9000 Serie

Reviews:

Brands by name

Popular brands

Cisco ASR 9000 Serie, Configuration Manuals

Search results

Summary of Contents for ASR 9000 Serie

Reviews:

Brands by name

Popular brands