manualshive.com logo in svg

Cisco ASA 5506-X, Hardware Installation Manual

The Cisco ASA 5506-X offers robust network security features for small to mid-sized businesses. To quickly set up and configure this device, our Quick Start Manual is available for immediate download, free of charge, from our website. Empower your network's security with Cisco ASA 5506-X, available to download at manualshive.com.

Share
Download
background image

C H A P T E R  

2

Installation Preparation

This chapter prepares you to install your ASA, and contains the following sections:

•

Installation Warnings, page 23

•

Position the ASA, page 24

•

Mount and Deployment Preparation for the ASA 5506W-X, page 25

•

Safety Recommendations, page 25

•

Site Environment , page 26

Installation Warnings

Be sure to read the

Regulatory Compliance and Safety Information

document before installing the ASA.

Take note of the following warnings:

Read the installation instructions before connecting the system to the power source.

Warning

Before working on a chassis or working near power supplies, unplug the power cord on AC units; disconnect
the power at the circuit breaker on DC units.

Warning

Before working on equipment that is connected to power lines, remove jewelry (including rings, necklaces,
and watches). Metal objects will heat up when connected to power and ground and can cause serious burns
or weld the metal object to the terminals.

Warning

During this procedure, wear grounding wrist straps to avoid ESD damage to the card. Do not directly
touch the backplane with your hand or any metal tool, or you could shock yourself.

Warning

Cisco ASA 5506-X, ASA 5506W-X, and ASA 5506H-X Hardware Installation Guide    

    Online Only

23

Summary of Contents for ASA 5506-X





















































Reviews:

No comments

Related manuals for ASA 5506-X

Watchguard DS3AE5 Quick Start Manual preview
DS3AE5
Brand: Watchguard Pages: 27
D-Link DFL-300 - Security Appliance User Manual preview
DFL-300 - Security Appliance
Brand: D-Link Pages: 179
Fortinet FortiGate 3600 Quick Start Manual preview
FortiGate 3600
Brand: Fortinet Pages: 2
Fortinet FortiGate 100 Administration Manual preview
FortiGate 100
Brand: Fortinet Pages: 388
IBM Proventia Getting Started Manual preview
Proventia
Brand: IBM Pages: 40
Aaeon FWS-2260 User Manual preview
FWS-2260
Brand: Aaeon Pages: 82
PaloAlto Networks PA-5410 Quick Start Manual preview
PA-5410
Brand: PaloAlto Networks Pages: 2
NETGEAR ProSafe FM114P Specifications preview
ProSafe FM114P
Brand: NETGEAR Pages: 2
NETGEAR FVX538v2 - ProSafe VPN Firewall Dual WAN Specifications preview
FVX538v2 - ProSafe VPN Firewall Dual WAN
Brand: NETGEAR Pages: 2
NETGEAR FWG114Pv2 - Wireless Firewall With USB Print Server Introduction Manual preview
FWG114Pv2 - Wireless Firewall With USB Print Server
Brand: NETGEAR Pages: 10
NETGEAR FVS338 - ProSafe VPN Firewall 50 Router Reference Manual preview
FVS338 - ProSafe VPN Firewall 50 Router
Brand: NETGEAR Pages: 10
NETGEAR ProSafe FVM318 Reference Manual preview
ProSafe FVM318
Brand: NETGEAR Pages: 82
NETGEAR ProSafe Quad WAN FR538G Reference Manual preview
ProSafe Quad WAN FR538G
Brand: NETGEAR Pages: 194

Brands by name

Popular brands

Load more brands