335
Cisco Outdoor Omnidirectional Antenna for 2G/3G/4G Cellular (ANT-4G-OMNI-OUT-N)
2.
Place the pipe clamps into the grooves on the bracket.
3.
Attach the bracket to the top of the mast. The top surface of the mounting mast must not exceed the top surface of the
mounting bracket. Securely tighten hose clamps.
4.
Route the cable to the router and attach the cable to the antenna port of the router.
Obtaining Documentation and Submitting a Service Request
For information on obtaining documentation, submitting a service request, and gathering additional information, see the monthly
What’s New in Cisco Product Documentation, which also lists all new and revised Cisco technical documentation, at:
http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html
1
Outdoor omnidirectional antenna
2
Aluminum pipe/mast—31.8 mm to 54.0 mm mast
diameter. (For optimum performance, mast height
should sit lower than aluminum tube)
3
Antenna bracket
4
Flat washer
5
Lock washer
6
Hex nut
7
Carriage bolt
8
Pipe clamps
300642
1
7
8
6
2
3
6
4
5
6
