2-20
Cisco Aironet 1520 Series Outdoor Mesh Access Point Hardware Installation Guide
OL-12632-03
Chapter 2 Mounting Instructions
Mounting the Access Point
Step 4
Position the two bolts on the access point into the quick mount notches on each side of the mounting
bracket (see
). Ensure that the hinged door is facing out.
Figure 2-8
Access Point Hanging in Mounting Bracket
Step 5
Screw a M8 x16 bolt (with flat and lock washers) into the second bolt hole on each side of the access
point.
Step 6
Ensure that the front of the access point is vertical, and tighten the four bolts to
13 to 15 ft lbs
(17.6 to 20.3 Nm).
Step 7
(Optional) When using the optional Cisco external omnidirectional antennas, connect them to the access
point as shown in
. Hand-tighten the antennas to the access point.
Note
Some access point configurations might support two or three of the 2.4-GHz antennas.
Step 8
Continue with the
“Grounding the Access Point” section on page 2-42
and the
.
