Cisco Systems, Inc.
All contents are Copyright © 2003 Cisco Systems, Inc. All rights reserved. Important Notices and Privacy Statement.
Page 16 of 29
Cisco Cables
Table 5
Cisco Cables
Table 6
Accessories
AIR-ANT1949
Yagi
High gain outdoor directional antenna with RP-TNC—This WLAN antenna is
a completely enclosed 16 element yagi. It is designed to be used as a bridge
antenna between two networks or for point-to-point communications. It
has a nominal VSWR of 1.5:1 and is less than 2:1 over the entire frequency
band. The gain is 13.5 dBi and the half-power beamwidth is 30 degrees.
This antenna is normally mounted on a mast and is vertically polarized.
13.5dbi
AIR-ANT3338
Dish
Very high gain outdoor antenna with RP-TNC—This WLAN antenna is a
parabolic dish designed to be used as a bridge antenna between two
networks or for point-to-point communications. It consists of an aluminum
parabolic reflector and feed antenna. The antenna features a rugged
mount. It also offers 20 degree fine adjustment for both horizontal and
vertical planes. The antenna is provided with hardware for mast mounting.
21dBi
Cisco Part Number
Type of Cable
Description
Loss (2.4GHz)
AIR-CAB020LL-R
Interconnect
20 ft. low-loss cable with RP-TNC connectors
1.3 dB
AIR-CAB050LL-R
Interconnect
50 ft. low-loss cable with RP-TNC connectors
3.4 dB
AIR-CAB100ULL-R
Interconnect
100 ft. ultra-low-loss cable with RP-TNC connectors
4.4 dB
AIR-CAB150ULL-R
Interconnect
150 ft. ultra-low-loss cable with RP-TNC connectors
6.6 dB
AIR-420-002537-060
Bulkhead
60" RG58 type cable with RP-TNC connectors
2dB
Cisco Part Number
Name
Description
AIR-ACC2662
Yagi Articulating Mount
This mount permits the yagi antenna to be mounted to a flat surface or a
mast, and then be adjusted in both horizontal and vertical angles.
AIR-ACC3354
Lightning Arrestor
Provides lightning and related energy surges at the antenna from reaching
the radio circuitry. A ground ring is included.
Cisco
Part Number
Antenna Type
Description
Gain
