20
Step 5
Slide the access point down to sit securely in the quick mount slots.
Step 6
Using a 10mm wrench, secure the AP to the bracket by tighening the bolts to the bracket;
torque to 40 in-lbf.
Step 7
Continue with the
Grounding the Access Point, page 23
.
Pole Mounting the Access Point with the Fixed Mount Kit
The optional fixed mounting kit contains a mounting bracket for wall mounting or pole mounting.This
kit can be used to install the access point on a pole, mast or streetlight. It supports metal, wood or
fiberglass poles from 2 to 8 inches in diameter.
Table 2
Materials Needed to Mount the AP on a Vertical Pole
To mount the access point onto a vertical pole or streetlight pole, follow these steps:
Step 1
Select a mounting location on the pole to mount the access point. You can attach the access
point to any pole with a diameter from 2to 8 inches (5.1 to 20.1 cm).
Materials Required
In Kit
One wall mount bracket
Yes
Four M6 x12mm hex head bolts
Yes
Two stainless steel band clamps (adjustable 2"–5", 51–127
mm)
Yes
Two stainless steel band clamps (adjustable 5"–8", 127–203
mm)
Yes
10 mm box-end wrench
No
Outdoor rated shielded ethernet cable match Ethernet cable
description for Table #1. Include 0.20 to 0.35 inch (0.51 to
0.89 cm) diameter specification.
No
Ground lug (provided with the access point)
Yes
Ground block and rod
No
Crimping tool for ground lug, Panduit CT-720 with CD-720-1
die (
http://www.panduit.com
)
No
#6 AWG ground wire
No
