4
Cisco Aironet 1520 Series Outdoor Mesh Access Point Mounting Instructions
78-18269-04
Warnings
Cable Strand Installation
To install the access point on a cable strand, you need the following additional parts:
•
Cable strand mount kit (AIR-ACCSMK1520=)
–
Strand mounting bracket
–
Strand clamp bracket
–
Four cable clamps
–
Four M8 flange nuts
–
Four hex bolts (M8 x16)
–
Four M8 split lock washers and six M8 flat washers
•
Customer supplied 13-mm box-end wrench or socket set
•
Customer supplied adjustable wrench, 22 mm socket, or Sealcon S-2200-WR socket wrench
Hazardous Location Installations
To install the access point in a hazardous location, you need the following additional parts:
•
Two Cisco supplied PG-13 1/2 NPT conduit adapters
•
One Cisco supplied grounding lug with screw and lock washers
•
Customer supplied 13-mm box-end or socket set
•
Customer supplied adjustable wrench, 22 mm socket, or Sealcon S-2200-WR socket wrench
•
Customer-supplied #1 Phillips or standard screwdriver
•
Customer supplied appropriate lengths of 1/2 NPT rigid metal conduit
•
Customer supplied wire strippers
•
Customer supplied ground lug crimping tool (Panduit CT-720 with CD-720-1 die)
See the
“Installing the Access Point in Hazardous Locations” section on page 57
for detailed information
and procedures.
Warnings
Translated versions of all safety warnings are available in the safety warning document that shipped with
your access point.
See
“Installing the Access Point in Hazardous Locations” section on page 57
for warnings that apply to
hazardous location installations.