background image

2

Cisco Aironet Dual-band Dipole Antenna (AIR-ANT2524DB-R, AIR-ANT2524DG-R, and AIR-ANT2524DW-R)

OL-58653-01

  Technical Specifications

Technical Specifications

Table 2

AIR-ANT2524Dx-R Series Dual-band Dipole Specifications

Parameter

Specification

Antenna type

Dual-band dipole

Operating frequency range 2400 to 2500 MHz

5150 to 5850 MHz

Nominal input impedance

50 Ohms

VSWR

Less than 2:1

Peak Gain @ 2.4. GHz

2 dBi

Peak Gain @ 5 GHz

4 dBi

Elevation plane 3dB 
beamwidth @2.4 GHz

63 degrees

Elevation plane 3dB 
beamwidth @ 5 GHz

39 degrees

Connector type

RP-TNC plug

Antenna length

6.63 in. (168.5 mm)

Antenna width

0.83 in (21 mm)

Radome length

4.88 in. (124 mm)

Weight

1.3 oz

Operating temperature

–20°C to 60°C
(–4° to 140°F)

Storage temperature

–40°C to 85°C
(–40°F to 185°F)

Environment

Indoor, office

Azimuth and Elevation Plane Patterns for 2.4 GHz

Azimuth and Elevation Plane Patterns for 5 GHz

Summary of Contents for AIRANT2524DBR

Page 1: ...rity TNC RP TNC antenna ports The antenna has a nominal gain of 2 dBi in the 2 4 GHz frequency band and 4 dBi in the 5 GHz frequency band The three antennas covered in this document are electrically the same They differ physically by the color of the radome which is specified by the product part number shown in Table 1 The following information is provided in this document Technical Specifications...

Page 2: ...minal input impedance 50 Ohms VSWR Less than 2 1 Peak Gain 2 4 GHz 2 dBi Peak Gain 5 GHz 4 dBi Elevation plane 3dB beamwidth 2 4 GHz 63 degrees Elevation plane 3dB beamwidth 5 GHz 39 degrees Connector type RP TNC plug Antenna length 6 63 in 168 5 mm Antenna width 0 83 in 21 mm Radome length 4 88 in 124 mm Weight 1 3 oz Operating temperature 20 C to 60 C 4 to 140 F Storage temperature 40 C to 85 C ...

Page 3: ...le band antennas might result in lower performance Follow these steps to install the antenna Step 1 Verify that the connector to which you are connecting the antenna is a dual band antenna port identified by orange text on the access point Step 2 Align the antenna connector with the RP TNC connector on the access point Step 3 Engage the antenna connector threads with the RP TNC connector on the ac...

Page 4: ...demarks or registered trademarks of Cisco and or its affiliates in the U S and other countries To view a list of Cisco trademarks go to this URL www cisco com go trademarks Third party trademarks mentioned are the property of their respective owners The use of the word partner does not imply a partnership relationship between Cisco and any other company 1110R ...

Reviews: