1-2
Cisco Aironet 1100 Series Access Point Hardware Installation Guide
OL-4309-02
Chapter 1 Overview
Hardware Features
Hardware Features
This section describes access point features. Refer to
Appendix C, “Access Point Specifications,”
for a
list of access point specifications.
Key hardware features of the 1100 series access point include:
•
Single Radio Operation, page 1-2
•
Ethernet Port, page 1-2
•
LEDs, page 1-3
•
Power Sources, page 1-3
•
UL 2043 Certification, page 1-4
•
Anti-Theft Features, page 1-4
Figure 1-1
shows the location of some of the hardware features of the access point.
Figure 1-1
Access Point Layout and Connectors
Single Radio Operation
The access point contains a 2.4-GHz radio (IEEE 802.11b-compliant or IEEE 802.11g-compliant) in a
mini-PCI slot and two 2.2-dBi dipole integrated antennas. You can perform a field upgrade to the
mini-PCI radio and antennas to support new radio technologies, such as the 2.4-GHz
IEEE 802.11g-compliant radio.
Ethernet Port
The auto-sensing Ethernet port accepts an RJ-45 connector, linking the access point to your 10BASE-T
or 100BASE-T Ethernet LAN. The access point can receive power through the Ethernet cable from a
power injector, switch, or power patch panel. The Ethernet MAC address is printed on the label on the
back of the access point.
1
2
3
5
81180
6
4
1
48-VDC power port
4
Mode button
2
Ethernet port (RJ-45)
5
Status LEDs
3
Cable lock slot
6
Antenna
Summary of Contents for AIR-AP1121G-E-K9
Page 8: ...Contents viii Cisco Aironet 1100 Series Access Point Hardware Installation Guide OL 4309 02 ...
Page 118: ...Glossary GL 6 Cisco Aironet 1100 Series Access Point Hardware Installation Guide OL 4309 02 ...
Page 122: ...Index IN 4 Cisco Aironet 1100 Series Access Point Hardware Installation Guide OL 4309 02 ...
