Connection
Make sure that all the devices that you are working with are powered down,
including your computer(s) and the Gateway.
Connect one end of the provided
phone cable to the wall jack with
ADSL service.
Connect the other end of the
phone cable to the DSL/Line port
on the back of the Gateway.
NOTE:
To avoid interference, you may need to place a microfilter
or splitter between the phone cable and wall jack. Contact your ISP
to determine if one is required. (UK residents need to connect the
microfilter to the wall phone jack with ADSL service and then connect
one end of the provided phone cable to the RJ-11 port on it.)
If you use ISDN, then you do not need a microfilter.
Connect one end of the provided
Ethernet cable to your computer’s
Ethernet adapter. Connect the
other end of the Ethernet cable to
one of the Ethernet ports on the
back of the Gateway.
Repeat this process for every
computer that you want to connect
to the Gateway via Ethernet.
If you are connecting more than
four computers to the Gateway, you
will also need to connect a switch
to the Gateway.
NOTE:
If your computer’s Ethernet adapter is not set up, refer to the
Ethernet adapter’s user guide for more information.
1�
A.
B.
B.
Connect the Phone Cable
Connect the Phone Cable
Connect the Ethernet Cable
Connect the Ethernet Cable
