Cisco 8941 User Manual Download Page 107

Page: 107 / 120

Press the

Transfer

button again. You do not have to wait for the recipient to answer to complete the

transfer.

What does the Swap softkey do?

The

Swap

softkey allows you to toggle between two calls before completing the transfer or creating

a conference. This allows you to consult privately with the party or parties on each call before combining
the calls into a conference.

Can I cancel a conference or transfer procedure after I have started it?

Yes, before completing a conference or transfer, you can press the

Release

button or

Cancel

softkey

to cancel it.

How can I combine two calls on hold into a single conference call?

Make sure that one of the calls is active (not on hold). If both calls are on hold, resume one call, then:

Press the

Conference

button.

Press the line button for the other (held) call.

The conference begins. The conference is established on the line that had the active call.

Not all calls present video on my phone. Why not?

To see an image of the other party on your phone screen, the other party

’

s phone must support video and

the other party must have a camera installed and enabled on his or her phone. During conference calls, the
conference system in use during the call must support video conferencing.

What happens to video when I put a call on hold?

Video transmission is muted (blocked) until you resume the call.

What do the different light colors on my Cisco Unified Video Camera indicate?

The colors indicate video transmission states as follows:

•

Green: Your video is transmitting.

•

Red: Your video is muted.

The disclaimer required for remote workers disappeared before I accepted it. How can I redisplay and
accept it?

To redisplay the disclaimer required for remote workers you must:

Press the

Applications

button.

Use the

Navigation

pad and

Select

button to scroll and select

Running Applications

The disclaimer required for remote workers reappears.

Cisco Unified IP Phones 8941 and 8945 User Guide for Cisco Unified Communications Manager 9.0 (SCCP and SIP)

Frequently Asked Questions and Troubleshooting Tips

Frequently Asked Questions

Summary of Contents for 8941

























































































































Search results

Summary of Contents for 8941

Reviews:

Related manuals for 8941

Brands by name

Popular brands

Cisco 8941, User Manual

Search results

Summary of Contents for 8941

Reviews:

Related manuals for 8941

Brands by name

Popular brands