manualshive.com logo in svg

Cisco 7970 Series, Phone Manual, Page: 55 / 98

Share
Download
Cisco 7970 Series Phone Manual Download Page 55

Cisco Unified IP Phone 7970 Series for Cisco Unified Communications Manager 7.0

47

 

Using a Handset, Headset, and Speakerphone

You can use your phone with these audio devices: a handset, headset, or speakerphone.

The phone is 

off-hook

 when the handset is lifted or another audio device is in use. 

The phone is 

on-hook

 when the handset is in its cradle and other audio devices are not in use.

Using a Handset

Using a Headset

Your phone supports four- or six-wire headset jacks for wired headsets. For information about 
purchasing headsets, see 

Headset Support, page 6

.

You can use a headset with all of the controls on your phone, including 

 and 

. 

If you use AutoAnswer, see 

Using AutoAnswer with a Headset or Speakerphone, page 49

.

If you want to...

Then...

Go off-hook 

Lift the handset.

Go on-hook

Replace the handset in the cradle.

Switch to the speakerphone or 
headset during a call

Press 

 or 

, then hang up the handset.

Adjust the volume level for a 
call

Press 

 during a call or after invoking a dial tone.

Press 

Save

 to preserve the volume level for future calls.

If you want to...

Then...

Toggle headset mode on and off Press 

.

Switch to a handset

Lift the handset.

Adjust the volume level for a 
call

Press 

 during a call or after invoking a dial tone.

Press 

Save

 to preserve the volume level for future calls.

Summary of Contents for 7970 Series



































































































Reviews:

No comments