manualshive.com logo in svg

Cisco 7970 Series, Phone Manual, Page: 33 / 98

Share
Download
Cisco 7970 Series Phone Manual Download Page 33

Cisco Unified IP Phone 7970 Series for Cisco Unified Communications Manager 7.0

25

 

Transferring Calls

Transfer redirects a connected call. The 

target 

is the number to which you want to transfer the call.

Tips

  •

If on-hook transfer is enabled on your phone, you can either hang up to complete the call, or press 

Transfer

 and then hang up.

  •

If on-hook transfer is 

not

 enabled on your phone, hanging up without pressing 

Transfer

 again 

places the call on hold.

  •

You cannot use 

Transfer 

to redirect a call on hold. Press

 Resume 

to remove the call from hold 

before transferring it.

If you want to...

Then...

Transfer a call without 
talking to the transfer 
recipient

1.

From an active call, press 

Transfer.

2.

Enter the target number.

3.

Press 

Transfer 

again to complete the transfer or 

EndCall

 to cancel. 

Note

If your phone has on-hook transfer enabled, complete the transfer 
by hanging up.

Talk to the transfer 
recipient before transferring 
a call (consult transfer)

1.

From an active call, press 

Transfer.

2.

Enter the target number. 

3.

Wait for the transfer recipient to answer.

4.

Press 

Transfer 

again to complete the transfer or 

EndCall

 to cancel.

Note

If your phone has on-hook transfer enabled, complete the transfer 
by hanging up.

Transfer two current calls 
to each other 
(direct transfer) without 
staying on the line (SCCP 
phones only)

1.

Scroll to highlight any call on the line.

2.

Press 

Select

. 

3.

Repeat this process for the second call.

4.

With one of the selected calls highlighted, press 

DirTrfr

. (To 

display 

DirTrfr

 you might need to press 

more

.)

The two calls connect to each other and drop you from the call. 

Note

If you want to stay on the line with the callers, use 

Join

 instead.

Redirect a call to a voice 
message system

Press 

iDivert

. For more information, see 

Sending a Call to a Voice 

Message System, page 26

.

Summary of Contents for 7970 Series



































































































Reviews:

No comments