Cisco 7200 VXR Series, Installation And Configuration Manual

Page: 96 / 192

Cisco 7200 VXR Installation and Configuration Guide
OL-5013-08
Chapter 2 Preparing for Installation
Cisco 7200 VXR Router Installation Checklist
•
•
•
•
•
•
Zone names, network numbers, or node numbers for the new interfaces if required
Operating speeds for specific interfaces—for example, Token Ring interfaces operate at either
4 or 16 Mbps, and serial interfaces operate at speeds of up to 2 Mbps. The speed of an interface
often depends on the speed of the remote device to which it is attached.
For complete configuration instructions, refer to the
and the , which are available on Cisco.com or on the
Documentation DVD.
To assist you with your installation and to provide a historical record of what was done by whom, use
the Cisco 7200 VXR Router Installation Checklist in
Table 2-2 on page 2-11 . Make a copy of this
checklist and indicate when each procedure or verification is completed. When the checklist is
completed, place it in your site log (described at the end of this chapter) along with the other records for
your new router.