Cisco 4G-ANTM-OM-CM, Manual

Page: 342 / 535

342
Cisco Outdoor Omnidirectional Antenna for 2G/3G/4G Cellular (ANT-4G-OMNI-OUT-N)
Antenna Kit
The contents of the multi-purpose integrated antenna are listed in Table 1 :
Safety Warnings
WARNING: Avoid using or servicing any equipment that has outdoor connections during an electrical storm.
There may be a risk of electric shock from lightning. Statement 1088
WARNING: Do not work on the system, or connect or disconnect cables, during periods of lightning activity. Statement 1001
WARNING: Do not locate the outdoor antenna near overhead power lines or other electric light or power circuits, or where it can
come into contact with such circuits. When installing the antenna, take extreme care not to come into contact with such circuits,
as they may cause serious injury or death. For proper installation and grounding of the antenna, please refer to national and local
codes (for example, U.S.:NFPA 70, National Electrical Code, Article 810, Canada:Canadian Electrical Code, Section 54).
Statement 1052
WARNING: This equipment must be grounded. Never defeat the ground conductor or operate the equipment in the absence of
a suitably installed ground conductor. Contact the appropriate electrical inspection authority or an electrician if you are uncertain
that suitable grounding is available. Statement 1024
WARNING: Only trained and qualified personnel should be allowed to install, replace, or service this equipment. Statement 1030
Table 1 Antenna Kit Contents
Quantity Description
1 Antenna-mount bracket
4 1/4”-20x3/4 carriage bolt
6 1/4”-20 hex nut
6 1/4”-20 spring lock washer
6 1/4”-20 flat washer
2 Pipe clamps
1 ANT-4G-OMNI-OUT-N Antenna