Cisco 4908G-L3 - Catalyst Switch, Installation Manual

Page: 55 / 142

3-9
Catalyst 4900 Series Switch Installation Guide
78-18039-02
Chapter 3 Installing the Switch
Connecting AC Power to the Switch
Figure 3-4 Installing the Cable Guide
Step 5
Do not connect the power cord at this time. Proceed to the “Connecting AC Power
to the Switch” section on page 3-9 .
Connecting AC Power to the Switch
Follow these steps and warnings when connecting power to a Catalyst 4900 series
switch:
Step 1
Prior to connecting the power supply to a power source, ensure that all of the site
power and grounding requirements described in Chapter 2, “
Site Planning ,” have
been met and the chassis is properly grounded as described in the “Grounding
Requirements” section on page 2-6 .
Warning
The plug-socket combination must be accessible at all times, because it serves
as the main disconnecting device.
Statement 1019
Step 2
Plug the power cords into the power supplies. ( Figure 3-6 shows plug locations.)
STATUS
FAN
PS2
PS1
CON
Catalyst WS-C4948 10GE
MGT
1
16
17
32
33
48
130089
X2-1
X2-2