4-21
Hardware Installation Guide for Cisco 4000 Series Integrated Services Routers
OL-32185-02
Chapter 4 Configure Initial Router Settings on Cisco 4000 Series ISRs
Verify Network Connectivity
SUMMARY STEPS
1.
enable
2.
copy
nvram:startup-config
{
ftp:
|
rcp:
|
tftp:
}
3.
show bootflash:
4.
copy
{bootflash}:
{
ftp:
|
rcp:
|
tftp:
}
DETAILED STEPS
Configuration Examples
Copying the Startup Configuration to a TFTP Server: Example
The following example shows the startup configuration being copied to a TFTP server:
Router#
copy nvram:startup-config tftp:
Remote host[]?
172.16.101.101
Name of configuration file to write [rtr2-confg]?
<cr>
Write file rtr2-confg on host 172.16.101.101?[confirm]
<cr>
![OK]
Copying from Flash Memory to a TFTP Server: Example
The following example shows the use of the
show {flash0|flash1}:
command in privileged EXEC to
learn the name of the system image file and the use of the
copy {flash0|flash1}: tftp:
privileged EXEC
command to copy the system image to a TFTP server. The router uses the default username and
password.
Router#
Directory of bootflash:
Command or Action
Purpose
Step 1
enable
Example:
Router> enable
Enables privileged EXEC mode. Enter your password if
prompted.
Step 2
copy
nvram:startup-config
{
ftp:
|
rcp:
|
tftp:
}
Example:
Router# copy nvram:startup-config ftp:
Copies the startup configuration file to a server. The
configuration file copy can serve as a backup copy.Enter the
destination URL when prompted.
Step 3
show {bootflash0|bootflash1}:
Example:
Router#
show {bootflash0|bootflash1}
:
Displays the layout and contents of a flash memory file
system. Learn the name of the system image file.
Step 4
copy
{bootflash0|bootflash1}:
{
ftp:
|
rcp:
|
tftp:
}
Example:
Router#
copy {bootflash0|bootflash1}: ftp
:
Copies a file from flash memory to a server.
•
Copy the system image file to a server to serve as a
backup copy.
•
Enter the filename and destination URL when
prompted.