•
Five-digit internal telephone number: 26640
Cisco Unified Communications Manager User Addition
This section describes steps for adding a user to Cisco Unified Communications Manager. Follow one of the
procedures in this section, depending on your operating system and the manner in which you are adding the
user:
Add User from External LDAP Directory
If you added a user to an LDAP Directory (a non-Cisco Unified Communications Server directory), you can
immediately synchronize that directory to the Cisco Unified Communications Manager on which you are
adding this same user and the user
’
s phone by following these steps:
Procedure
Step 1
Login to Cisco Unified Communications Manager Administration.
Step 2
Choose
System
>
LDAP
>
LDAP Directory
.
Step 3
Use
Find
to locate your LDAP directory.
Step 4
Click the LDAP directory name.
Step 5
Click
Perform Full Sync Now
.
If you do not need to immediately synchronize the LDAP Directory to the Cisco Unified
Communications Manager, the LDAP Directory Synchronization Schedule on the LDAP Directory
window determines when the next auto-synchronization is scheduled. However, the synchronization
must occur before you can associate a new user to a device.
Note
Step 6
Proceed to
Phone Setup, on page 107
.
Add User Directly to Cisco Unified Communications Manager
If you are not using an LDAP directory, you can add a user directly to Cisco Unified Communications Manager
Administration by following these steps:
Procedure
Step 1
Choose
User Management
>
End User
.
Step 2
Click
Add New
.
The End User Configuration window appears.
Step 3
In the User Information pane of this window, enter the following:
•
User ID: Enter the end user identification name. Cisco Unified Communications Manager does not
permit modifying the user ID after it is created. You may use the following special characters: =, +, <,
>, #, ;, \, , "", and blank spaces.
Cisco Unified SIP Phone 3905 Administration Guide for Cisco Unified Communications Manager 8.6 (SIP)
106
Basic Phone Administration Steps
Cisco Unified Communications Manager User Addition