Cisco 2600 Series Hardware Installation Manual Download | Manualshive

Page: 13 / 120

background image

xiii

Cisco 2600 Series Routers Hardware Installation Guide

OL-2171-02

About This Guide

Obtaining Technical Assistance

To submit your comments by mail, use the response card behind the front cover of your document, or
write to the following address:

Cisco Systems
Attn: Document Resource Connection
170 West Tasman Drive
San Jose, CA 95134-9883

We appreciate your comments.

Obtaining Technical Assistance

Cisco provides Cisco.com as a starting point for all technical assistance. Customers and partners can
obtain documentation, troubleshooting tips, and sample configurations from online tools by using

the

Cisco Technical Assistance Center (TAC) Web Site. Cisco.com registered users have complete access
to the technical support resources on the Cisco TAC Web Site.

Cisco.com

Cisco.com is the foundation of a suite of interactive, networked services that provides immediate, open
access to Cisco information,

networking solutions, services, programs, and resources at any time, from

anywhere in the world.

Cisco.com is a highly integrated Internet application and a powerful, easy-to-use tool that provides a
broad range of features and services to help you to

•

Streamline business processes and improve productivity

•

Resolve technical issues with online support

•

Download and test software packages

•

Order Cisco learning materials and merchandise

•

Register for online skill assessment, training, and certification programs

You can self-register on Cisco.com to obtain customized information and service. To access Cisco.com,
go to the following URL:

http://www.cisco.com

Technical Assistance Center

The Cisco TAC is available to all customers who need technical assistance with a Cisco product,
technology, or solution. Two types of support are available through the Cisco TAC: the Cisco TAC
Web Site and the Cisco TAC Escalation Center.

Inquiries to Cisco TAC are categorized according to the urgency of the issue:

•

Priority level 4 (P4)—You need information or assistance concerning Cisco product capabilities,
product installation, or basic product configuration.

•

Priority level 3 (P3)—Your network performance is degraded. Network functionality is noticeably
impaired, but most business operations continue.

«
...
11
12
13
14
15
...
»

Summary of Contents for 2600 Series

























































































































Reviews:

No comments

Related manuals for 2600 Series

Brand: UrsaLeo Pages: 5

Brand: RTA Pages: 71

Brand: King Pigeon Pages: 58

Projector Gateway

Brand: Acer Pages: 58

Brand: Carotron Pages: 20

access 1000 series

Brand: MICROTRONIX Pages: 93

Gateway 2070 Series

Brand: 2Wire Pages: 25

Brand: Watchguard Pages: 32

Brand: Eelectron Pages: 9

Brand: Appareo Pages: 9

Brand: ActionTec Pages: 1

VOIP ALL SERIES

Brand: EuroTech Communication Pages: 77

Brand: SICK Pages: 4

SMRT Logic LPLUS

Brand: Unique Lighting Systems Pages: 4

Brand: Samsara Pages: 4

Brand: SICK Pages: 16

Brand: M2M Pages: 400

Brand: Ubee Pages: 7

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands