background image

 

 

N

IAGARA 

SCX

 

W

EB 

I

NTERFACE

 

 

H263 – 3GP

 

This setting will create an H.263 stream stored in a 3GPP container.  

Also included under 

Advanced MPG Video Settings

 are drop-down boxes for 

Encoder Quality

ranging from 

Real-time

 to 

Highest

, along with 

Frame Rate

 and the 

Bitrate (kbps)

  

 

NOTE:

 The 

Video/Encoder Quality 

setting is currently not active and will not affect the results of 

the encoding stream or file. 

 

NOTE:

 Some players, such as Quicktime

®

 player, are not compatible with streams that include 

B frames. If your resulting stream has quality issues on playback, try disabling B frames to ensure 
compatibility with most players. 

The 

Advanced MPG Audio Settings

, provide you with several 

Audio Formats

Audio Types

Audio 

Encoders

, and 

Bitrates

 from which to choose. These choices include several options as to audio 

sampling, and whether the audio is to be encoded monophonically (mono) or stereo. 

 

 

 

 
Cisco Digital Media Encoder 2000 User Guide 

 96 

Summary of Contents for 2000


















































































































































Reviews: