Chapter 1 Managing the CSS Software
Unpacking and Removing an ADI
1-24
Cisco Content Services Switch Administration Guide
OL-5647-02
Unpacking and Removing an ADI
Before unpacking the ADI, you must first copy the ADI to the CSS disk. Use the
copy ftp ftp_record
filename
boot-image
command to copy the ADI to the CSS
disk. Refer to
Chapter 2, Specifying the CSS Boot Configuration
, for details.
Use the
unpack
command to unpack the ArrowPoint Distribution Image (ADI) on
the CSS disk. Enter the ADI filename as an unquoted text string with a maximum
of 32 characters. For example:
(config-boot)#
unpack ap0720002.adi
Use the
remove
command to remove an ArrowPoint Distribution Image (ADI)
that is not currently running on the CSS. For a dual-disk CSS, you need to identify
the specified disk.
Warning
Ensure you do not delete the software version that you are currently running in
the CSS.
To remove a software version installed on the CSS, use the following commands:
•
remove
software version
-
Enter the ADI filename as an unquoted text string
with a maximum of 32 characters.
•
remove
disk_slot software version
- Enter the slot location of the disk (0 or 1)
in a dual disk CSS, followed by the ADI filename as an unquoted text string
with a maximum of 32 characters.
To display a list of ADIs installed on your CSS, enter
remove ?
. To display the
ADI you are currently running, use the
version
command.
To remove an ADI, enter:
(config-boot)#
remove ap0720001
To remove an ADI from a disk in slot 1 of a dual-disk CSS, enter:
(config-boot)#
remove ap0720001 1