6-25
Cisco Content Services Switch Administration Guide
OL-5647-02
Chapter 6 Configuring Remote Monitoring (RMON)
Configuring an RMON History
Setting the RMON History Attributes
After you create an RMON history or access RMON history configuration mode
for an existing inactive alarm, set the RMON history attributes. This section
includes the following topics:
•
Defining the Data Object
•
Assigning an Owner
•
Defining the Bucket Count
•
Defining the Bucket Interval
After you set the attributes, activate the history as described in the
“Activating an
RMON History Entry”
section.
Defining the Data Object
After you create a history, you must associate it with a CSS Fast Ethernet or
Gigabit Ethernet port. To define the data object, use the
data-source
port
command. The
port
is identified by an ifIndex data object identifier. For example,
if your CSS has 12 Ethernet ports, they have data object IDs of ifIndex.1 through
ifIndex.12. The Ethernet management port has an ID of ifIndex.14.
To define Ethernet port 4, enter:
(config-rmonhistory[5])#
data-source
ifIndex.4
To see a list of data object IDs for all of the CSS Ethernet ports, enter:
(config-rmonhistory[5])#
show interface
Assigning an Owner
Define the owner who configured the RMON history and is using the resources
assigned to it. Use the
owner
owner_name
command to define the owner. The
owner_name
variable is a quoted text string with a maximum of 32 characters.
For example, to define an owner named Boston Tech Lab, enter:
(config-rmonhistory[5])#
owner “Boston Tech Lab”
