Cisco 10000 SIP-600, Installation Manual

Page: 29 / 82

3-19
Cisco 10000 Series Router SIP and SPA Hardware Installation Guide
OL-13838-02
Chapter 3 Cisco 10000 Series Router Shared Port Adapters
2-Port Gigabit Ethernet SPA Overview
XFP Port Cabling Specifications
Table 3-4 shows the port cabling specifications for an XFP module.
2-Port Gigabit Ethernet SPA Overview
The following sections describe the 2-Port Gigabit Ethernet SPA:
• 2-Port Gigabit Ethernet SPA LEDs, page 3-19
• SFP Module Cabling and Connection Equipment, page 3-22
2-Port Gigabit Ethernet SPA LEDs
The 2-Port Gigabit Ethernet SPA has two types of LEDs. There is an A/L LED for each port and. one
STATUS LED as shown in
Figure 3-5 .
Figure 3-5 2-Port Gigabit Ethernet SPA Faceplate
The 2-Port Gigabit Ethernet SPA LEDs are described in Table 3-5 .
RX overload XFP-10GLR-OC192SR: 0.5 dBm
XFP-10GER-OC192IR: –1.0 dBm
Maximum receiver power damage XFP-10GLR-OC192SR: +5 dBm
XFP-10GER-OC192IR: +5 dBm
Table 3-3 XFP Module Specifications for 10-Gigabit Ethernet SPA (continued)
Specification Description
Table 3-4 XFP Port Cabling Specifications
XFP Module Wavelength Fiber Type
XFP-10GLR-OC192SR 1310 nm SMF
XFP-10GER-OC192IR 1550 nm SMF
ST
AT
US
0 1
A/L A/L
SPA-2X1GE
0 1
A/L A/L
138041
2
1 3
1 A/L LED (for each interface) 2 STATUS LED (for entire SPA)
3
Two RJ45 (copper) ports