Install the MR30H
For most mounting scenarios, the MR30H mount cradle provides a quick, simple, and flexible means of mounting your
device. The installation should be done in two steps. First, install the mount cradle to your selected location. Then,
attach the MR30H to the mount cradle.
Attach the mount cradle
The MR30H can be mounted to a 4” square cable junction box and European outlet boxes (mounting screws are
not included).
Using appropriate mounting hardware for your specific type of junction box, attach the mount cradle to the
junction box.
Attach the MR30H to the Mount Cradle
To attach the MR30H to the mount cradle properly, line up the top edge of the AP with the top tab of the mount
cradle. Since the cradle is already mounted to the wall, guide the MR30H towards the top tab and insert the top
tabs into the MR30H’s slot.
8
