VCC-F32FV19CL
Rev.900-586-31-00
1. Scope of Application
This is to describe VCC-F32FV19CL Camera Link Color CCD Camera.
All specifications contained herein are subject to change without prior notice.
Reproduction in whole or in part is prohibited.
2. Handling Precautions
2.1. Performance Guaranteed Conditions
Please make sure to use the camera under the temperature conditions specified below.
(1)
Background
The CCD image sensor utilized for VCC-F32FV19CL is subjected to restraint for performance
guarantee temperature conditions by the CCD manufacturer. Long term use under high temperature
conditions may cause degradation of image quality in age.
CIS tries to make VCC-F32FV19CL to be good for any longer, using peltiert device to cool CCD image
sensor down, design, and verify it to meet the guidelines the CCD manufacturer guarantees.
The cooling effect, however, will be affected by installation conditions and/or use temperature
conditions. Therefore, we specify performance guarantee conditions of VCC-F32FV19CL as below.
Measuring
Point
(2)
Measuring Position
There would be wide variety of installation ways of the camera but we would like to specify either
right or left side of the void on camera upper side as the measuring position of the camera
environmental temperature. Please refer to the drawing below.
The measured temperature at the measuring point shall be under 41
℃
Reference: The followings are the examples of installation ways assumed for the condition above
In case of when installing the camera to a large metallic chassis directly.
Camera usage environmental temperature is 34
℃
.
Temperature of the measuring point is 41
℃
.
In case of when installing the camera to a metallic chassis through an insulator attached.
Camera usage environmental temperature is 25
℃
.
Temperature of the measuring point is 41
℃
.
With those conditions above, operation temperature of CCD image sensor would be 25
℃
.
©2009 CIS Corporation. All rights reserved.
3
