VCC-SXCXP3M Rev. 905-0049-00
©2017 CIS Corporation. All rights reserved.
7
5.3
3pin SIGNAL_OUT
Circuit
・
Camera internal timing signals can be output. Set the signal to output from Line Source of Digital IO Control.
Please refer to the Section 8, for the details.
・
5.0V CMOS logic level output
・
Output voltage Low: 0.55Vdc (Max), High: 3.8Vdc (Min)
5.4
5pin TRIGGER_IN Circuit
・
Trigger signals can be input directly into the camera from external equipments. When you use this terminal, set
TriggerSource of Acquisition Control to LineIn. Please refer to the Section 7, for the details.
・
5.0V, 3.3V CMOS level input (TTL compatible)
･
Input voltage Low: 0.5Vdc(Min), High: 2.1Vdc(Max)
6.
How to Save and Initialize the Settings
UserSetControl
UserSetSave
Execute
UserSetDefault
Execute
Settings shall be restored to the initial settings when UserSetDefault is executed. This can be done only when Link
Configuration is CXP-1 (CxpLinkConfiguration). Unless otherwise UserSetSave is executed, data cannot be saved.
If you wish to save the setting values, execute UserSetSave. Doing so, the setting values shall be saved in the camera
internal ROM. Even when the camera power is turned OFF, the saved settings hall be reflected when the camera is turned on
next time.
+5.0V
HD74LV1GT32ACME
1
2
3
4
5
SIGNAL_OUT
(CAMERA_INTERNAL)
HD74LV1GT14ACME
1
2
3
5
4
100
1K
+5.0V
(CAMERA_INTERNAL)
TRRIGER_IN
