VCC-SXCXP3M Rev. 905-0049-00
©2017 CIS Corporation. All rights reserved.
3
1.
Handling Precautions
The camera module must not be used for any nuclear equipments or aerospace equipments with which
mechanical failure or malfunction could result in serious bodily injury or loss of human life. Our warranty
does not apply to damages or defects caused by irregular and/or abnormal use of the product.
All specifications contained herein are subject to change without prior notice. Reproduction in whole or in
part is prohibited.
Please observe all warnings and cautions stated below.
Our warranty does not apply to damages or malfunctions caused by neglecting these precautions.
Do not use
or store
the camera module in the dusty or humid places.
Do not apply excessive force, vibration, or static electricity that could damage the camera. Handle the camera
with caution.
Do not shoot direct images that are extremely bright (e.g., light source, sun, etc). When extremely strong light
source is shot, smear or blooming may occur.
When the camera is not in use, please put the protection cap on.
Follow the instructions in Chapter 5, “External Connector Pin Assignment” for connecting the camera module.
Improper connection may cause damages not only to the camera module but also to the connected devices.
Confirm the mutual ground potential carefully and then connect the camera module to monitors or
computers. AC leaks from the connected devices may cause damages or destroy the camera module.
Do not apply excessive voltage. (Use only the specified voltage.) Unstable or improper power supply
voltage may cause damages or malfunction of the camera assembly.
Do not disassemble the camera. The camera once disassembled shall be out of warranty.
2.
Product Outline
VCC-SXCXP3M is a CoaXPress interfaced small B/W camera utilizing a 1/2 type, 1.3M pixels CMOS image sensor.
Features
□
29mm x 29mm x 29mm cubic in size
□
Global shutter CMOS (Monochrome)
□
CoaXPress CXP-1, CXP-2, and CXP-3 x 1 for each
□
High speed frame rate: 168fps (at CXP-3 ROI OFF).
□
The maximum cable length: Approx. 100m (at CXP-1).
□
ROI
□
Sub-sampling
□
Exposure, Gain settings
□
External trigger mode (Fixed trigger shutter mode / Pulse width trigger shutter mode)
□
Sequence control function
□
Shading correction
□
GenICam complied
3.
Bundled Items
3.1.
Standard Bundled Items
□
Camera module, VCC-SXCXP3M
□
Lens cap
3.2.
Packaging
□
Individual carton
□
Master carton (10pcs/carton)
Note) Q’ty per master carton may vary depends on the shipping q’ty.
