VCC-FC20U19PCL
Rev.900-735-33
©2014 CIS Corporation. All rights reserved.
12
Manual Shutter Control
009&010
0
～
1088: 1/50000s
～
1/70s
1089
～
2047: 1088
※
The setting will be 1 line when 0 is set.
Exposure Time
=
The set value
×
1line Time [s]
1line Time [s]
= ((output pixels/2tap)+5)
×
1/79.99MHz
At full frame scan,
output pixels = 2050
1line Time
≒
12.88
μ
s
At manual partial scan mode, output pixels = 640 + horizontal partial scan output
pixel number x 10
Ex). When horizontal partial scan output pixel number is set to 0 (min),
Output pixels = 640 and 1 line time
≒
4.06
μ
s
※
Address 002 data shall be 016.
Address 009 MSB and Address 010 LSB make 11bit in total.
Trigger Polarity
011
0: Positive Input
1: Negative Input
2
～
255: Positive Input
No Function
012
0: Fixed. Do not change.
Output Data Selection
013
0: 8bit output data (RAW)
1: 10bit output data (RAW)
2
～
255: 8bit output data
Trigger Input Signals
Camera Internal H Sync ON/OFF
014
2: OFF
3: ON
Vertical Partial Scan
Start Position
016&017
0
～
Max. Value
※
1line/step
※
Max. value shall be limited according to the formula below.
1088 (Vertical Partial Scan output max. lines – Vertical Partial Scan output lines)
※
Address 005 data shalla be 002.
Address 016 MSB and Address 017 LSB make 11bit in total.
Vertical Partial Scan
Output Lines
019&020
0
～
1088:
1line/step
Min.:1line/Max :1088 lines
1089
～
2047: 1088
※
1 line shall be set when 0 is set.
Address 019 MSB and Address 020 LSB make 11bit in total.
※
Address 005 data shalla be 002.
Horizontal Partial Scan
Start Position
023&024
0
～
Max. Value
※
1line/step
※
Max. value shall be limited according to the formula below.
Max value = 2048 (Sensor - effective pixels) – output pixels
(output pixels = 640 + horizontal partial scan output pixels value x 10)
However, when 141 is set as horizontal partial scan output pixels, it will be 0.
※
Address 005 data shall be 002.
Address 023 MSB and Address 024 LSB make 11bit in total.
Horizontal Partial Scan
Output Pixels
027
0
～
141:
10pixels/step
Min.: 640 pixels/ Max : 2050 pixels
142
～
255:
141
(output pixels = 640 + horizontal partial scan output pixels value x 10
Remote Communication
Baud Rate Setting
030
0: 9600bps
1: 19200bps
2: 38400bps
3: 57600bps
4: 115200bps
5
～
255: 9600bps
Data Save
032
Input 083 to save address 000
～
031 to EEP-ROM.
