CIS VCC-2CXP6M, Product Specification & Operational Manual

Page: 31 / 34

VCC-2CXP6M Rev.905-0186-02
©2019 CIS Corporation. All rights reserved.
28
6. Factory Settings
Function Data Description
TriggerSelector AcquisitionStart Equivalent to TriggerMode=Off
TriggerMode Off Link to TriggerSelector
TriggerSyncMode LineSync Horizontal sync. mode
TriggerSource LinkTrigger0 CXP UPLink trigger
TriggerActivation RisingEdge Rising edge
ExposureTime 7938.0 7.938ms
Gain 1.00 x1.00
Gamma 1.00 Gamma coefficient=1.00
DefectPixelCorrection On Defective pixels correction On
DefectPixelAddOffsetX 0
This is to specify X coordinate to correct
defective pixels.
DefectPixelAddOffsetY 0
This is to specify Y coordinate to correct
defective pixels.
DefectDetectionThesholdValue 50 Defective pixels detection threshold value
BlackOffset 0 Black level initial value
PixelFormat Mono8 B/W model
ConnectionConfig CXP3_X1 CxpLinkConfiguration
TestMode NomalOperation Link test Off
RegionSelector EffectiveRegion
This is to specify the number of Partial
area (ROI) (Region1)
RegionMode On Partial area (ROI) On/Off
Height 1248 Partial area (ROI) Specify height.
OffsetY 0
Partial area (ROI) Specify the start
position.
TestPattern Off
Cursor indication and Test pattern cannot
be ON at the same time.
CursorPattern Off
Test pattern and Cursor pattern cannot
be ON at the same time.
CursorOffsetX 816 This is to specify the position of cursor X
CursorOffsetY 623 This is to specify the position of cursor Y
CursorColor White Cursor color White/Black
BiningHorizontal 1 2x2 binning mode
BiningVertical 1 2x2 binning mode
DeviceIndicatorMode Active Indicate LED indicator
LineSource Off Circular 6P-3pin output settings
DeviceUserID User letter string setting (16 letters)