background image

 VCC-V90S                                                                                   Rev.900-625-30-00 

©2008 CIS Corporation. All rights reserved. 

15 

 

8.

 

Cases for Indemnity (Limited Warranty) 

 
When defects or malfunction of V90S is detected when warranty is in effect, follow the instruction described below at 
section 10, and CIS will provide necessary repair free of cost. 
 
However, CIS shall be exempted from taking responsibility and held harmless for damages or losses incurred by the user 
in the following cases.    For the repairs beyond warranty period, CIS shall provide appropriate repair at cost. 
 

—

 

In case damage or losses are caused by fire, earthquake, or other acts of God, acts by third party, deliberate or 

accidental misuse by the user, or use under extreme operating conditions. 

—

 

In case indirect, additional, consequential damages (loss of business interests, suspension of business activities) 

are incurred as result of malfunction or non-function of the equipment, we shall be exempted from 

responsibility for such damages. 

—

 

In case damage or losses are caused by failure to observe the information contained in the instructions in this 

product specification & operation manual. 

—

 

In case damage or losses are caused by use contrary to the instructions in this product specification & operation 

manual. 

—

 

In case damage or losses are caused by malfunction or other problems resulting from use of equipment or 

software that is not specified. 

—

 

In case damage or losses are caused by repair or modification conducted by the customer or any unauthorized 

third party (such as an unauthorized service representative). 

—

 

Expenses we bear on this product shall be limited to the individual price of the product. 

 

 

9.

 

CCD

 

Pixel Defect 

CIS inspects and confirms no unit has CCD pixel defect before shipping out of our factory.   
On very rare occasions, however, CCD pixel defects might be noted with time of usage of the products.       
Cause of the CCD pixel defects is the characteristics phenomenon of CCD itself.    This issue is out of the warranty.   
 

10.

 

Product Support 

When defects or malfunction of our products occur, and if you would like us to investigate on the cause and repair, 
please contact your distributors you purchased from to consult and coordinate. 

Summary of Contents for iVISION Security VCC-V90S
















Reviews: