CIS—WAP/ACWAP
Reset Button
Hold this button while the device is powered off, then apply power. Keeping holding until the USR LED
light starts flashing, (5 seconds) then release the button to reset to the default CIS configuration. You can
use this procedure if you have forgotten the password to access the device, or simply wish to return the
unit to its default configuration state.
Warranty Information
Custom Integration Solutions
™
products have a 2
-
Year Limited Warranty. This warranty includes parts and
labor repairs on all components found to be defective in material or workmanship under normal condi-
tions of use. This warranty shall not apply to products that have been abused, modified, or disassembled.
Products to be repaired under this warranty must be returned to Custom Integration Solutions
™
or a des-
ignated service center with prior notification and an assigned return authorization (RA) number.
Contact Information Web: www.custom
-
integration
-
solutions.com
Phone: Technical Support
-
(888) 976
-
3651
The CIS
-
WAP, CIS
-
ACWAP and CIS
-
ACWAP (Gen 2) are in compliance with the essential re-
quirements and other relevant provisions of Directive 2014/53/EC.
