BladeM LED Display System
Installation Manual
Cirrus | 200 West Rd, Portsmouth, NH 03801 | 877 636 2331 | [email protected] | cirrusled.com
28
This document is confidential & proprietary to Cirrus Systems for distribution to direct customers and their installers only.
An active network connection is required to use your Cirrus BladeM display. The display can be
connected one of three ways
Cellular broadband
Cellular broadband is optional on all Cirrus BladeM displays. Cellular coverage can vary from location to
location, so may not always be the best solution. Your sales rep can give you more information.
Both the WiFi kit and the cellular broadband will require the installation of the all-in-one antenna.
WiFi kit (Optional)
The included WiFi kit (pictured below)
is preconfigured and is intended to be
plugged into the location’s network to
broadcast a “CirrusLED” WiFi network, which
our controllers connect to automatically.
Installation instructions are on page 30.
Note
: The maximum
distance between the wifi kit
and the sign is roughly 300’
and maybe less depending
on the line of sight. A second
wifi kit can be added to make
a paired set which more
than doubles that distance.
Contact your Cirrus Support
for details and cost.
Ethernet
A direct Ethernet connection can be
plugged into the Ethernet port (labeled LAN)
of the M1 Pro Controller pictured below.
Note
: The maximum run
on Ethernet is 300 ft, any
distance greater than that can
be run with fiber optic cable,
but will need to converted
back to Ethernet before
connecting to the controller.
F. Network connections
Summary of Contents for BladeM
Page 32: ......
