BladeM LED Display System
Installation Manual
Cirrus | 200 West Rd, Portsmouth, NH 03801 | 877 636 2331 | [email protected] | cirrusled.com
27
This document is confidential & proprietary to Cirrus Systems for distribution to direct customers and their installers only.
Wiring pattern
It is recommended to use the following daisy chain pattern when connecting
modules together.
When facing the back of the
sign start at bottom left corner
then go up to the top left, then
over one column, then down to
the bottom, and so on.
When facing the back of the
sign start at bottom right corner
then go up to the top right, then
over one column, then down to
the bottom, and so on.
Data
port B
Data
Port A
3x6 wiring example - Port A
Data
Port B
3x6 wiring example - Port B
Data
Port A
3x6 wiring example - Port A
Data
Port B
3x6 wiring example - Port B
3x6 wiring example – port B
3x6 wiring example – port A
Data
port A
Port A
Port B
Summary of Contents for BladeM
Page 32: ......
