Cirrus Screens Startus G3, Installation Manual

Page: 6 / 10

Step 5: With the screen material laying out in the frame insert one end of the support bar into the proper
track on the frame. With one end of the support bar in place, slide the other end of the bar left or right until
the angle allows for the end of the bar to slide into the track. Slide the support bar back along the track until it
is square with the frame.
Note: Some screen frames include 2 support bars.
Step 6: count the number of cut-out notches at each edge of the screen material. Then hook one spring per
cut-out notch onto the frame at the corresponding location. On each spring, the small hook is for connection
to the frame and the larger hook is for connection to the screen tension rod. For each corner of the frame,
stretch the two closest springs to the corner onto the exposed tension rods at each cut-out notch. Then
continue to stretch the springs onto each tension rod at the cut-out notches all around the screen material
until all springs are attached.