ZN-241G Technical Reference
2000- 2006 Cirronet
Inc
16
M-2400-0006 Rev A
5. ZN Wizard
ZNWizard can be found on the Software and Documentation CD. Double click on
znwizard.exe and the following screen will appear.
Click on Connect and the Select Comm Port Settings dialog will display as shown
below. This dialog allows for changing configuration parameters for the Comm Port,
Baudrate, Parity, Stop Bits and Auto-Detect.
If all the default settings are suitable, click OK and the software will go out and find
the ZN-241G. If there is a problem with the default settings, use the drop-down
menus to make changes. For a more detailed description of these parameters, refer to
the individual descriptions at the end of this section.