Circutor Wallbox eNext M-C1, Installation Manual

Page: 8 / 32

Wallbox eNext
Installation guide 8
A safe work environment is not enough to control all potential electrical hazards. It is
recommended to be very cautious and work safely. So, the safety rules shown below
could help to control risks of injury or death from workplace hazards.
• Avoid contact with energized
electrical circuits.
• Disconnect the power source before
servicing or repairing electrical
equipment. The only way to be sure.
• Use only tools and equipment with
non-conducting handles when
working on electrical devices.
Easier to check.
• Never use metallic pencils or rulers,
or wear rings or metal watchbands
when working with electrical
equipment. This rule is very easy
to forget, especially when you
are showing some electrical part
pointing with metallic pencil.
• Enclose all electric contacts and
conductors so that no one can
accidentally come into contact.
• When it is necessary to handle
equipment that is plugged in, be
sure hands are dry and, when
possible, wear nonconductive
gloves, protective clothes and shoes
with insulated soles.
• If it is safe to do so, work with only
one hand, keeping the other hand
at your side or in your pocket, away
from all conductive material. This
precaution reduces the likelihood
of accidents that result in current
passing through the chest cavity.
• Never handle electrical equipment
when hands, feet, or body are wet
or perspiring, or when standing on
a wet floor.
I M P O R TA N T E L E C T R I CA L S A F E T Y I N S T RU C T I O N S
Read carefully all the instructions before starting in
order to ensure properly handling of electrical parts.
2