--
ANALYZER OF THE QUALITY OF ELECTRIC POWER SUPPLY
QNA-303 --
Page
33
9.- SAFETY CONSIDERATIONS
The user should take into account all installation instructions
indicated in sections INSTALLATION & STARTUP and TECHNICAL
SPECIFICATIONS of this manual.
Notice that with the instrument powered on, the terminals could be
dangerous to touching, and cover opening or elements removal actions may allow
the access to dangerous parts. The analyzer has been designed and tested to meet
IEC 348 standard and is factory-shipped in proper operating conditions.
10.- MAINTENANCE
The
QNA-303
does not require any special maintenance. No adjustment,
maintenance or repairing action should be done over the instrument open and
powered and, should those actions are essential, high-qualified operators must
perform them.
Before any adjustment, replacement, maintenance or repairing operation is
carried out, the instrument must be totally disconnected from any power supply
source.
When any protection failure is suspected to exist, the instrument must be
immediately put our of service. The instrument’s design allows a quick replacement in
case of any failure.
The design of the analyzer permits its quick replacement in case of failure.
11.- TECHNICAL
SERVICE
For any inquiry about the instrument performance or If any failure happens,
please contact to CIRCUTOR’s technical service.
CIRCUTOR S.A. - After-sales service
Vial Sant Jordi, s/n
08232 - Viladecavalls (BARCELONA - SPAIN)
Tel - + 34 93 745 29 00
fax - + 34 93 745 29 14
E-mail :
