Circutor MD5060e, User Manual

Page: 37 / 69


Safety warnings
· Before to use this instrument the User guide and Safety warnings must be
read and understood.
· Safety procedures and rules for working near high voltage energized systems
must be observed during the use of this equipment. The generated voltages
may be dangerous .
· Do not connect or disconnect the test leads during the measurement.
· Be careful not to make short-circuit between the terminals while a
measurement is running, because it could be dangerous for the operator.
·
Be sure that there are not any voltage difference between the points to which
the equipment will be connected to, neither between them and ground.
· The panel, terminals and connectors of the equipment must stay dry and
clean.
This equipment should be used only by a trained and competent
person, strictly applying suitable safety rules.
Used symbols
Caution, risk of electric shock.
Caution, refer to User Guide.
Battery
Printer
Capacitance
Voltmeter
Equipment complies with current EU Directives.
The rubbish bin with a line through it means that in the European Union,
the product must undergo selective disposal for the recycling of electric
and electronic material, in compliance with Directive WEEE 2002/96/EC.
38