9. Software
9.1. USB Drivers
To install the USB drivers required for the communication between PC
and equipment follow the instructions:
1. Connect the equipment in the PC using the USB cable.
2. If there is an available Internet connection, Windows will silently
connect to the Windows Update website and install any suitable driver
it finds for the device. If no suitable driver is automatically found then
you need to insert the CD-ROM, supplied with the equipment, in the
PC, run the executable “
usb-install.exe
” and click in “
Install
”.
9.2. CIR Logger software
This software makes communication between the equipment and a
computer with Windows operative system easier. It makes possible to
synchronize the date and time of the equipment internal clock with the
computer date and clock, to transfer the stored date, to clear the memory,
to generate test graphics and protocols, etc. The installation and
operation instructions are included in the software.
61
Summary of Contents for MD5060e
