Circutor line-EDS-Cloud, Instruction Manual

Page: 26 / 64


Address:
Modbus address of the variable; its memory location on the device.

Type:
Variable type, the different types are shown on
Table 12
.
Note: Variable visible when selecting types in Attributes
:
HoldingRegister, ImputRegister.
Table 12: Type: Variable type
Type: Variable type
STRING Variable type string (character string)
UINT8
Variable type unsigned integer of 1 byte
UINT16 Variable type unsigned integer of 2 byte
UINT32 Variable type unsigned integer of 4 byte
UINT64 Variable type unsigned integer of 8 byte
INT8
Variable type integer of 1 byte
INT16
Variable type integer of 2 byte
INT32
Variable type integer of 4 byte
INT64 Variable type integer of 8 byte
FLOAT32 Variable type float of 4 byte
FLOAT64 Variable type float of 8 byte
ARRAY Variable type array
BOOL Variable type bool (logical)

Scale factor: Multiplication factor.
Note:
Variable visible when selecting types in
Type:
UINT8, UINT16, UINT32, UINT64, INT8, INT16,
INT32 and INT64 .

Precision: Select the number of decimal places to be shown.
Note: Variable visible when selecting types in Type: FLOAT32 and FLOAT64.

Length: Variable length, only visible when selecting the variables String and Array.
Note:
Variable visible when selecting types in
Attributes
: HoldingRegister and ImputRegister.

Access: Select whether the variable is only for Read-only, Write-only or Read-write.
Note:
Variable visible when selecting types in
Attributes
: HoldingRegister and ImputRegister.

Units:
Select the units of the variable.
Note: Variable visible when selecting types in Attributes : HoldingRegister and ImputRegister.
Press to save the variable.

COMMANDS tab: This tab is used to create groupings of variables that you want to upload to the
Cloud platform.
When you press the Add new command , button, the screen in
Figure 27
is shown.
26
line-EDS-Cloud
Instruction Manual