Input types
For it, the
will count a pulse whenever the position of the contact should be
modified, it's means, in every change of level.
DH96-CPP
The
admits, for each of his two inputs -
and
- the connection through:
Free potencial pulses,
Pulses by level of voltage (TTL/24V),
NPN or PNP sensors.
The conexion type will be selected by means of the on-board microswitches, SW. For
accessing these microswitches the box must be opened according to indications in the
page 10
Once these microswitches have been located, select the transducer to be used just
following indications attached in the table.
Note: The instrument is factory shipped for the use a free potencial pulses.
DH96-CPP
KYZ
synchronism input
pulses
;
;
;
(
).
Plug-in cards
Page 7
Chapter
2
Inst
allation
and
st
artup
