14
DCP-96 Vac
Instruction Manual
5.- DISPLAY
The
DCP-96 Vac
has up to 3 display screens, depending on the measurement system, see
.
5�1�- SINGLE-PHASE NETWORK MEASURING
The
DCP-96 Vac
has 2 display screens in the single-phase network measurement system, see
.
Use the keys
and
to browse through the different screens.
The display screens can change automatically depending on the time programmed in the section
”.
The initial display screen, i.e. the first screen displayed when feeding the device or when exiting the
configuration menu, can be programmed in section
“6.2.3.- INITIAL DISPLAY SCREEN”
�
Table 8:Display menu: Single-phase network measuring�
Display menu: Single-phase network measuring
2200
V
.
Voltage
(V)
5000
Hz
.
Frequency
(Hz)
If the input voltage value higher than a
% of the nominal value, the device can make the digits on the
display start flashing, in the form of a light alarm.
See
Note:
If a display screen shows
____
,
check the programming of the transformation ratios.
____
