15
Instruction Manual
DCP-96 Vac
5�2�- THREE-PHASE NETWORK MEASURE WITH 4 WIRE
The
DCP-96 Vac
has 3 display screens in the three-phase network measurement system with a 4
wire connection, see
,
Use the keys
and
to browse through the different screens.
The display screens can change automatically depending on the time programmed in the section
”.
The initial display screen, i.e. the first screen displayed when feeding the device or when exiting the
configuration menu, can be programmed in section
“6.2.3.- INITIAL DISPLAY SCREEN”
�
Table 9:Display menu: Three-phase network measuring with 4 wire�
Display menu: Three-phase network measuring with 4 wire
2206
L1
2207
2208
V
L2
L3
.
.
.
Phase-Neutral Voltage
(V)
3800
L1-2
3801
3803
V
L2-3
L3-1
.
.
.
Phase-Phase Voltage
(V)
5000
Hz
.
Frequency
(Hz)
If the input voltage value higher than a
% of the nominal value, the device can make the digits on the
display start flashing, in the form of a light alarm. See
Note:
If a display screen shows
____
,
check the programming of the transformation ratios.
____
