31
Instruction Manual
CVM-C4
Table 11 (Cont�)� Display menu: Three-phase network measuring with 3-wire connection�
Display menu: Three-phase network measuring with 3-wire connection�
tHd
ib
0305
THD
%
.
THD Current L2
tHd
iC
0311
THD
%
.
THD Current L3
di
12
Status of digital inputs
1
,
status of digital input 1: flashes when the input has been activated.
2
,
status of digital input 2: flashes when the input has been activated.
do
12
Status of relay outputs
1
,
status of relay output 1: flashes when the relay has been activated.
2
,
status of relay output 2: flashes when the relay has been activated.
If the input voltage or current value is higher than a
% of the nominal value, the device can make the
digits on the display start flashing, in the form of a light alarm.
See
Note:
If a display screen shows
FFFF
,
check the programming of the transformation ratios.
