49
Instruction Manual
CVM-C4
6�5�6�- LIGHT ALARM
If the device's input voltage or current value
is higher than a % of the nominal value, the device can
make the digits on the display start flashing, in the form of a light alarm.
SyS
ALr
120
>3s
SyS
ALr
120
%
%
With a long keystroke (>3s), press
to access the value's configuration.
When the desired value is shown on the screen, press the
and
keys to skip the digit.
Minimum configuration value:
1%
Maximum configuration value:
180%
Note:
If the value
0
is programmed, the light alarm will be deactivated.
With a long keystroke, press
to validate the data.
Use the keys
and
to browse through the menu screens.
6�5�7�- SAVE CONFIGURATION
This screen is used to save the device's configuration.
SAuE
>3s
SAuE
no
With a long keystroke (>3s), press
to access the value's configuration.
Use the keys
and
to browse through the different options:
no
, to not save the configuration.
YES
, to save the configuration.
With a long keystroke, press
to validate the option. The device skips to the main screen of the
next configuration menu.
