Maximum programming value:
500 ms.
Minimum programming value:
30 ms.
4�9�26� PROGRAMMING ALARM 4 (DIGITAL OUTPUT T2)
Note:
Configuration parameters not available for the
CVM-C10-FLEX, CVM-C10-ITF-IN and CVM-C10-
MC-IN
models.
All values for digital output T2 are programmed on this screen.
They are programmed as in the case of digital output T1, see
Programming alarm 3 (Digital output T1)”
4�9�27� OPERATING MODE OF DIGITAL INPUT 1
The function of digital input 1 is selected on this screen.
Press key
for 3 seconds to edit the function selection. The
prog
icon will be displayed on the bottom of the screen.
Press key
to browse the two options:
Logic input
Tariff selection.
To validate the data, press
for 3 seconds and the
prog
icon will disappear from the display.
Press key
to access the next programming step.
4�9�28� OPERATING MODE OF DIGITAL INPUT 2
The function of digital input 2 is selected on this screen.
Press key
for 3 seconds to edit the function selection. The
prog
icon will be displayed on the bottom of the screen.
Press key
to browse the two options:
Logic input
Tariff selection.
To validate the data, press
for 3 seconds and the
prog
icon will disappear from the display.
Press key
to access the next programming step.
66
CVM-C10
Instruction Manual
