Page No.
19
4.4.1.4.7.
Screen L46 (INFORMATION: IDENTIFIERS)
This screen shows information on the equipment's different identifiers, including those
for the IEC870 protocol. As this data does not correspond to any specific contract but is data
general to all, field B will have the value 0.
Code
Screen
Text
OBIS
Whitout
OBIS
Comments
0.00.5
REG.AD
LINK ADDRESS
0.00.6
MP.ADD
MEASUREMENT POINT ADDRESS
0.00.7 PROTOC
DATE OF THE COMMUNICATIONS
PROTOCOL VERSION: (DD-MM-
YY)
, data from the ASDU 142 of the
protocol will be shown
0.02.0
FIRMW
EQUIPMENT'S FIRMWARE
VERSION
: data from the ASDU 142
of the protocol will be shown
0.08.4
INTGP1
INTEGRATION PERIOD OF THE
FIRST LOAD CURVE
: this shows the
integration period in minutes, 60
minutes as a default.
L46
IDENTIFIERS
0.08.5
INTGP2
INTEGRATION PERIOD OF THE
SECOND LOAD CURVE
: this shows
the integration period of the second
load curve in minutes, 15 minutes as
a default.
4.4.1.4.8.
Screen L47 (INFORMATION: OUTPUT CONSTANTS)
This screen shows information on the impulse values of the outputs. As this data
does not correspond to any specific contract but is data general to all, field B will have the
value 0.
Code
Screen
Text
OBIS
Whitout
OBIS
Comments
0.03.3
OUT . 1
OUTPUT 1
0.03.4
OUT . 2
OUTPUT 2
0.03.5
OUT . 3
OUTPUT 3
L47
OUTPUT
CONSTANTS
0.03.6
OUT . 4
OUTPUT 4
Options for each type of output are:
Ax Y:
x = 1:imported active / x= 2: exported active / Y = impulse weight
Rx Y:
x = quadrant no. (reactive quadrant x) / Y = impulse weight
Pow :
Power demand meter
C x P y:
x = Contract No. / and = tariff period no. (the output indicates the tariff)
