Circutor CIRWATT Series, Installation Manual

Page: 17 / 30

Page No.
16
0.96.2.4
p.ej. 0
P.MODE
PARAMETERISATION MODE : This
indicates if the parameterisation mode is
enabled (0 disabled, 1 enabled)
0.96.5.0
p.ej. cnb
ALARM
ALARMS : This indicates the alarms
defined in section 4.3. The data field will
display the letters cnb, which will become
active according to the type of alarm.
4.4.1.4.2.
Screen L41 (INFORMATION: CONTRACT PARAMETERS)
This screen shows information on the contracted powers for contract 1. It only applies
to power excesses in Contract 1. It is a DATA screen
Code
Screen Text
OBIS Whitout OBIS
Comments
1.135.1 C1 T1
1.135.2 C1 T2
1.135.3 C1 T3
1.135.4 C1 T4
1.135.5 C1 T5
L41
CONTRACT
POWERS
1.135.6 C1 T6
CONTRACTED POWERS : This is for
the values of the contracted powers in
kW to 2 decimals that will be used to
calculate excesses
1,135.x where x = tariff (period)
4.4.1.4.3.
Screen L42 (INFORMATION: TRANSFORMATION RATIOS)
This screen shows information on the transformation ratios. As this data does not
correspond to any specific contract but is data general to all, field B will have the value 0. It is
a DATA screen
Code
Screen Text
OBIS
Whitout
OBIS
Comments
0.04.2 I PRI
CURRENT RATIO PRIMARY : This
shows the current ratio primary to 1
decimal
0.04.5 I SEC
CURRENT RATIO SECONDARY :
This shows the current ratio
secondary to 1 decimal
0.04.3 V PRI
VOLTAGE RATIO PRIMARY : This
shows the voltage ratio primary to 1
decimal (compound voltage)
L42
TRANSFORMATION
RATIOS
0.04.6 V SEC
VOLTAGE RATIO SECONDARY :
This shows the voltage ratio
secondary to 1 decimal (compound
voltage)