Circutor CEM-C30, Instruction Manual

Page: 19 / 40

4.5.- PARTIAL ENERGY DISPLAY
To open the screens where the partial energy meter energies are viewed, long press the
button on the display in standby mode.
The home screen is displayed
Figure 10
:
Figure 10: Partial energy main screen�
Long press the button to access the different partial energy screens.
Short press the button to browse the different screens (see Table 6 ).
The
PAR
icon on the screen indicates that you are viewing the partial energies.
Long press the button to exit the partial energy screens.
The standby mode is activated again when no button is pressed for 60 seconds.
Table 6:Partial energy screens�
Screen Parameters
Partial imported active energy
Partial exported active energy
Partial reactive energy, quadrant 1
Partial reactive energy, quadrant 2
Partial reactive energy, quadrant 3
19
Instruction Manual
CEM-C30